Raise the operator cab. (See Raising on Page 10-30-2.)
Remove the operator seat. (See Removal And Installation on Page 50-31-1.)
Remove the mounting nut (Item 1) [Figure 50-31-14]
Remove the end release buckle (Item 2) [Figure 50-31-14]
Installation: Be sure tether strap (Item 3) [Figure 50-31-14] is on the seat belt stud behind the end release buckle.
Remove the mounting nut (Item 1) [Figure 50-31-15]
Remove the seat belt retractor (Item 2) [Figure 50-31-15]
Installation: Be sure tether strap (Item 3) [Figure 50-31-15] is on the seat belt stud behind the seat belt retractor.
Remove the mounting bolt (Item 1) [Figure 50-31-16]
Remove the shoulder harness retractor (Item 1) [Figure 50-31-17]
Installation: Line up the bolt (Item 1) [Figure 50-31-16] with the mounting bracket (Item 2) [Figure 50-31-17] on the inside of the cab.
