The Maintenance Clock alerts the operator when the next service interval is due. EXAMPLE: The Maintenance Clock can be set to a 250 hour interval as a reminder for the next 250 hour planned maintenance.
During machine operation, a two beep alarm will sound when there are less than 10 hours until the next planned maintenance. The hour interval (Item 1) and [SEr] (Item 2) will alternate in the display screen (Item 3) [Figure 60-200-1] for 10 seconds. The display will then revert back to the previous display and will appear for 10 seconds every time the machine is started until the maintenance clock is reset.
The Keyless Right Panel, if equipped, will display a message (Item 1) [Figure 60-200-2] alerting the operator to service the machine. This message will remain for 10 seconds before reverting back to the previous screen and will appear for 10 seconds every time the machine is started until the maintenance clock is reset.
The Keyless Right Panel, if equipped, will display a wrench icon (Item 1) [Figure 60-200-3] alerting the operator to service the machine. This icon will remain on the display until the maintenance clock is reset.
NOTE: Key Switch machines will not display the BobCARESM PM message or wrench icon on the right panel.
