Remove the port relief plug (Item 1) [Figure 20-40-33] from the auxiliary circuit of the control valve.
Installation: Always use new O-rings (Item 1) [Figure 20-40-34]. Tighten to 38 – 45 ft.-lb. (52 – 61 N•m) torque.
The control valve may be equipped with an optional auxiliary port relief valve (Item 1) [Figure 20-40-35].
Remove the auxiliary port relief valve.
Installation: Always use new O-rings (Item 1) [Figure 20-40-36]. Tighten to 38 – 45 ft.-lb. (52 – 61 N•m) torque.
