BOBCAT S130 – HYDRAULIC CONTROL VALVE (ACS) OR (SJC) – Port Relief/Anti-Cavitation Valve Removal And Installation (Tilt, Base End)

Remove the tilt port relief/anti cavitation valve (Item 1) [Figure 20-41-38] from the base end of the tilt section.

Replace the O-ring (Item 1) [Figure 20-41-39] before installation.

Installation: Lightly lubricate with oil and tighten to 38 – 45 ft.-lb. (52 – 61 N•m) torque.


Leave a Reply

Your email address will not be published. Required fields are marked *