BOBCAT S130 – ENGINE SPEED CONTROL (SJC) – Disassembly And Assembly

Remove the spring (Item 1) [Figure 70-21-10] from the foot speed control assembly.

Remove the bushing/nut (Item 1) [Figure 70-21-11] from the pedal lever.

Remove the fiber washer (Item 1) [Figure 70-21-12] from the bushing/nut.

Remove the foot pedal lever (Item 2) and linkage rod (Item 3) [Figure 70-21-12].

Remove the fiber washer (Item 1) and washer (Item 2) [Figure 70-21-13] from the pivot bolt.

Remove the pivot bolt (Item 1) [Figure 70-21-14] from the speed control.

The pivot assembly shown disassembled [Figure 70-21-15].

NOTE: No lubrication is necessary or recommended on the engine speed control.

Reverse the disassembly procedure to assemble the (SJC) speed control.


Leave a Reply

Your email address will not be published. Required fields are marked *