BOBCAT S130 – CONTROL SYSTEM (ACS) – Handle Lock Solenoid Disassembly And Assembly

Remove solenoid (Item 1) from the solenoid mount (Item 2) [Figure 60-130-26].

Installation: Apply a drop of oil to the solenoid threads and tighten solenoid to 35 – 40 ft.-lb. (47 – 54 N•m) lubed torque.

Check the O-ring (Item 1) [Figure 60-130-27] for damage. Replace as necessary.


Leave a Reply

Your email address will not be published. Required fields are marked *