BobCat E35 – X-CHANGE – Assembly

Install the bushings (Item 1) and seals (Item 2) [Figure 40-200-10] (both sides).

Install the O-ring (Item 1) [Figure 40-200-11] (both sides). Use grease to hold the O-rings in place.

Install the link (Item 1) [Figure 40-200-12].

Install the pin (Item 1) [Figure 40-200-13].

Install the bolt (Item 1) and nuts (Item 2) [Figure 40-200-14].

Roll the two seals (Item 1) [Figure 40-200-15] into the groove between the link and the attachment.

 

Leave a Reply

Your email address will not be published. Required fields are marked *