BobCat E35 – TRACK UNDERCARRIAGE COMPONENTS (STEEL TRACK) – Roller Removal And Installation

Loosen the bolt (Item 1) and nut. Remove the top roller (Item 2) [Figure 30-21-39].

Loosen the bolts (Item 1) [Figure 30-21-40] on the track roller on both sides of the track frame.

Installation: Tighten the bolts to 544 – 604 N•m (401 – 445 ft-lb) torque.

Remove the bottom roller (Item 1) [Figure 30-21-41].

NOTE: The top and bottom rollers are not serviceable.
Replace the roller if it is damaged.


Leave a Reply

Your email address will not be published. Required fields are marked *