BobCat E35 – RIGHT SIDE COVER – Latch Adjustment

Loosen the two nuts and two bolts (Item 1) [Figure 40-220-6] and adjust the latch.

Loosen the two nuts (Item 1) [Figure 40-220-6] and adjust the striker bracket.

Adjust the latch and striker until the top edge of the right side cover (Item 1) is even with the top edge of the tailgate (Item 2) [Figure 40-220-6].
Tighten the bolts and nuts.

Loosen the two bolts (Item 1) [Figure 40-220-6] and adjust the alignment bracket.

Adjust the alignment bracket until the rear edge of the cover (Item 1) is even with the rear edge of the tailgate (Item 2) [Figure 40-220-6]. Tighten the bolts.

 

Leave a Reply

Your email address will not be published. Required fields are marked *