BobCat E35 – CYLINDER HEAD – Valve Clearance Adjustment

Adjust the valve clearance with the engine stopped and cold.

The correct valve clearance is 0,18 – 0,22 mm (0.007 – 0.0087 in) [Figure 60-80-5].

Make sure the piston is at T.D.C. when making the adjustment for the valves of the particular cylinder.

Put the correct size feeler gauge between the rocker arm and valve stem. Turn the adjustment bolt until the clearance is correct [Figure 60-80-6].


Leave a Reply

Your email address will not be published. Required fields are marked *