BobCat E35 – CONTROL PATTERN SELECTOR VALVE – Disassembly And Assembly

Clean the outside of the valve before disassembly.

Remove the snap ring (Item 1) [Figure 20-100-3].

Remove the nylon washers (Item 1) [Figure 20-100-4].

Wrap a shop towel around the spool and pull the spool out of the valve [Figure 20-100-5].

Remove the detent balls (Item 1) and spring (Item 2) [Figure 20-100-6].

Remove the O-ring (Item 1) and nylon washer (Item 2) [Figure 20-100-7].

Remove the O-ring (Item 1) [Figure 20-100-8] from the valve body.


Leave a Reply

Your email address will not be published. Required fields are marked *