BobCat 753 – HYDRAULIC CONTROL VALVE (FOOT CONTROL) – Plug

Remove the plug (Item 1) [Figure 20-40-64] (Port F2).or optional port relief valve from the control valve.

Installation: Always use new O-rings and back-up washers. Tighten to 35-40 ft.-lbs. (47-54 Nm) torque.

Remove the O-rings (Item 1) and back-up ring (Item 2) [Figure 20-40-65] from the plug.

 

Leave a Reply

Your email address will not be published. Required fields are marked *