BobCat 753 – HYDRAULIC CONTROL VALVE (FOOT CONTROL) – Auxiliary Electric Solenoid Disassembly

Remove the nut (Item 1) [Figure 20-40-116] from both solenoids.

Installation: Tighten the nut to 8-12 ft.-lbs. (11-16 Nm) torque.

Remove the coil (Item 1) [Figure 20-40-117].

Remove the solenoid valve (Item 2) [Figure 20-40-117].

Installation: Tighten valve to 8-12 ft.-lbs. (11-16 Nm) torque.

Remove the O-rings (Item 1) [Figure 20-40-118] from the solenoid valves.

 

Leave a Reply

Your email address will not be published. Required fields are marked *